Loading...

Absolare 845 Single Ended Triode Amplifier

" Life, dynamics, and truthfulness in music "

Timbres are richly portrayed, with a density of color and warmth that makes even the best solid-state sound very slightly mechanical or artificial. Absolare totally lack any synthetic patina, instead rendering instruments and voices with a natural and organic quality. It’s the kind of sound that as soon as the music starts playing just seems “right”—you don’t have to consciously overlook the system’s lack of timbral realism to enjoy the music. The Absolare electronics have a directness and realism that conveys a more convincing illusion of live instruments.

Robert Harley
Product of the Year Award

Robert Harley, The Absolute Sound 2013
Golden Ear Award

Robert Harley, The Absolute Sound 2013
Best of Show

Robert Harley CES 2013, Munich High-End 2013, Munich High-End 2014
Best of Show

Jonathan Valin, The Absolute Sound, RMAF 2013
The presentation was, as it’s been several times before in the past, first-rate: fast, dark, rich, full-bodied, and extremely finely detailed.

Jonathan Valin, The Absolute Sound, Munich High-End 2015

The Absolare S.E.T. power amplifier is capable of reproducing music with speed, contrast, body and the life-like presentation of instruments. Single-Ended Triodes are traditionally known for their magical midrange yet, Absolare S.E.T.’s robust capabilities makes it’s realistic performance unique amongst Single-Ended power amplifiers.

Absolare is able to bring these qualities - the required dynamics, bass control and the highest possible harmonic resolution to the Single-Ended Triode topology in a coherent fashion. In addition, Absolare re-defines the power perception as well. A true 52 watts, if applied correctly, is sufficient to drive a broad range of speakers. It is not only the electrical design but also the quality of components used to implement that design that help to insure that the listener hears a life-like presentation of the musical performance. Approximately 80% of the power and signal components are custom manufactured by Mundorf. In addition, we realize that the best 845 tube sockets are made in Japan, and the most natural sounding resistors are also made by a specialized company in Japan. The transformers are custom manufactured for Absolare after years of research and development in Europe. The Absolare S.E.T. Power Amplifiers have been presented since the Munich High end 2012 show, and has received dozens of Best of Show awards since its introduction.

The Absolare Single Ended Triode Amplifier is housed in two matching chassis in classic monoblock construction. The laser cut, precision welded 3mm aluminium chassis is enclosed in leather clad high-density fibre panels to minimize mechanical resonances. Power supply and speaker output transformers are isolated within epoxy filled metal cans to minimize vibration and magnetic interference. Supporting the entire structure is a 5mm thick aluminium base plate that also provides a stable foundation for the feet. Internal components are mounted on a thick aluminium plate that is bolted to the chassis. The massive top plate is more than half inch (14mm) thick where all critical components are mounted. This is preferrable to the common practice of having a very thick front panel just to support power indicator LEDs while all the signal components are mounted onto thin PCB's. All signal connectors are gold/silver plated tellurium copper. Binding posts are silver plated copper with polyethylene outer barrels to minimise conductor mass. All tube sockets are pure teflon with gold plated copper contacts.

The power supply for B+ voltage contains a three-stage capacitor-inductor double-pi filter which employs the highest grade Mundorf capacitors with ultra-low ESR to preserve maximum levels of dynamics and detail in the output signal.. Power by-pass capacitors are placed at every tube's supply pin to further increase dynamics and lower noise. All tube heaters are DC regulated and heavily filtered. All internal cabling uses Echole’s proprietary alloys. A timer circuit enables a smooth start-up operation to protect the tubes from imbalanced power-up voltages. Power resistors are oversized for safety in the case of tube failures.

The all tube signal section is configured in pure Single Ended Triode architecture with capacitor coupling between stages. The driver section is a modified mu-follower design with a minimum number of components to preserve purity. Signal components are directly mounted to the underside of the tube sockets with point-to-point soldering. Balanced models employ input transformers for balanced operation .

There are three models of the Absolare S.E.T. Amplifier available for our customers. The key differences between the models are in the use of even more exotic parts as you move up the line which results in even greater musical performance.

Passion:

Absolare’s production standard signal and power section utilize Mundorf’s custom-matched Silver-Gold-Oil/TubeCap capacitors and Echole’s proprietary Obsession-grade Silver/Gold/Palladium alloy wiring.

Signature:

The Signature series is a significant step above the Passion series. Within the signal path Duelund’s select CAST coupling capacitors together with Echole’s Signature cabling are utilized. The N.O.S. driver tubes are carefully chosen to align with this new level of purity. The sound is described as being better than ever in terms of naturalness, coherence, with a very convincing sense of realism and emotional communication
Finally, there is a very limited edition Altius model available for the Absolare S.E.T. Power amplifiers. Please contact us for further information about the Altius S.E.T. amplifier.

Design: Class A, Zero Feedback, Parallel Single-Ended Architecture

Tubes: 2x 845, 2x 6SN7 - Every unit comes with select NOS tubes

Bandwidth: 15 Hz - 25 KHz +/- 1.0 dB

Input: 1 x RCA (XLR optional)

Input impedance: 75 KOhms

Input Sensitivity: 1.25 Volts (balanced version 5 Volts)

Gain: 21 dB @ 4 ohm, 24 dB @ 8 ohm

Output Power: 52 Watts

Speaker impedance: 4 - 8 Ohms

Dimensions: 38.2 x 62.2 X 29.5 cm (WxDxH), excl. feet